| Patent Number |
Title Of Patent |
Date Issued |
| 7451857 |
Seat mount structure for saddle ride type vehicle |
November 18, 2008 |
| A brake caliper support structure and a brake caliper structure for a saddle-ride type all terrain vehicle can attain a reduction in size and weight of a disc brake and can scrape off mud and snow accumulated within a wheel. A distance from a point which represents the center of a front |
| 7069782 |
Vehicle speed sensor mounting structure for a vehicle |
July 4, 2006 |
| A vehicle speed sensor mounting structure of a vehicle for supporting a vehicle speed sensor. The structure includes a vehicle body for suspending an engine. The engine output is transmitted through a final reduction gear to wheels via an axle. A vehicle speed sensor is mounted on th |
| 6935982 |
Differential gear |
August 30, 2005 |
| A recess is formed on the side surface of output-side cams on the right side with through holes being formed on the sidewall of the case body of the differential case at positions corresponding to the recesses. An annular member is placed on the case body so as to be capable of moving, |
| 6892845 |
Two-wheel drive/four-wheel drive switching system for a vehicle |
May 17, 2005 |
| A two-wheel drive/four-wheel drive switching system provided with an electromagnetic coil for connecting or disconnecting a driving shaft and a driven shaft. The accessories connected to the electromagnetic coil of the switching system are provided. The accessories are installed in space |
| 6889806 |
Vehicular two-wheel drive and four-wheel drive switching system |
May 10, 2005 |
| To provide a vehicular two-wheel drive and four-wheel drive switching system the configuration of which is simple and which can be built with minor changes to the existing configuration. The switching system hardly generates any noise and can be individually lubricated in a state sep |
| 6786293 |
Two-Wheel-drive/four-wheel-drive switching system for vehicle |
September 7, 2004 |
| A two-wheel-drive/four-wheel-drive switching system for a vehicle wherein a switching mechanism is securely fixed and functions of the switching mechanism can be secured, preventing noise from being made. An outside flange is provided to an electromagnetic coil forming a switching me |
| 6769505 |
Vehicle with two/four wheel drive switching device |
August 3, 2004 |
| A two/four-wheel drive switching device capable of avoiding interference with other components as far as possible at the time of installation of the device. All portions of a two/four-wheel drive switching device which portions are connected to a final reduction unit for front wheels are |
| 6758297 |
Two-wheel-drive/four-wheel-drive switching system for vehicle |
July 6, 2004 |
| A two-wheel-drive/four-wheel-drive switching system for a vehicle wherein noise is reduced and a state of drive can be securely indicated. A two-wheel-drive/four-wheel-drive switching system for a vehicle is provided with a switching unit provided to either of power transmission mech |
| 6698563 |
Vehicular two-wheel drive and four-wheel drive switching system |
March 2, 2004 |
| To provide a vehicular two-wheel drive and four-wheel drive switching system the configuration of which is simple and which can be built with minor changes to the existing configuration. The switching system hardly generates any noise and can be individually lubricated in a state sep |
| 6695329 |
Saddle type vehicle |
February 24, 2004 |
| A saddle type vehicle for attaining an appropriate weight distribution and a low centroid position. Suspension mechanisms are each composed of an upper arm and lower arms, the upper and lower arms being disposed in vertically spaced positions. A shock absorber is interposed between the |
| 6679348 |
Vehicular two-wheel/four-wheel drive switching device |
January 20, 2004 |
| A vehicular two-wheel/four-wheel drive switching device for selectively transmitting power or disconnecting the transmission of rotary power to a power transmission system having a driving shaft connected to the drive side and a driven shaft fitted to the driving shaft via respective inn |
| 6659256 |
Two-wheel and four-wheel driving change-over device for vehicle |
December 9, 2003 |
| A two-wheel and four-wheel driving change-over device for a vehicle is provided. A change-over unit intermittently performs power transmission for the power transmission mechanism. The change-over unit includes a driving shaft connected to a driving side, a driven shaft fitted to the |
| 6644756 |
Wheel structure |
November 11, 2003 |
| A large-diameter part, the diameter of which is larger than the diameter in the center, is provided at the edges of a rim via parts having a difference in a level. Curled parts are provided on both edges of the rim by curling the large-diameter part. Each end face of the curled parts is |
| 6521851 |
Brake lever conjunctive switch device |
February 18, 2003 |
| A brake lever conjunctive switch is provided which is capable of making the operating timings of a pair of switches different while minimizing changes in the shape of a switch box. The brake lever conjunctive switch includes a switch box to which a brake lever is pivotally attached. A pa |
| 6517165 |
Structure of motor vehicle wheel |
February 11, 2003 |
| Each aluminum alloy wheel includes a rim and a disc, and is attached to a hub of an axle by engaging bolt holes on the disc with bolts provided on the hub, and by screwing nuts into the bolts. The disc is made of a single plate, and nut seats are formed around the bolt holes and have a w |
| 6467565 |
Shaft drive type power transmission |
October 22, 2002 |
| A joint is sub-assembled on a front wheel propeller shaft side of a vehicle by integrally fitting one end of the joint to one end of the front wheel propeller shaft and covering the connection portion with a boot. This arrangement provides a shaft drive mechanism capable of easily assemb |
| 6431569 |
Front wheel suspension apparatus |
August 13, 2002 |
| To enlarge the up and down stroke of a front wheel without changing the layout of a steering shaft and a tie rod. An upper arm and a lower arm are arranged in an upward and downward manner, respectively. The upper and lower arms are pivotably attached to a vehicle body and respective out |
| 6412368 |
Saddle seat type motor vehicle with limited slip differential |
July 2, 2002 |
| In a saddle seat type motor vehicle for use on uneven ground and including a front final assembly provided between left and right front wheels, the front final assembly provides the left and right front wheels with driving torques differentiated at a predetermined ratio when the wheels r |
| 6371259 |
Drum brake structure for a wheel of all-terrain vehicle |
April 16, 2002 |
| A real wheel is fitted directly to the brake drum, and cooling fins are provided at the outer surface of the brake drum for dissipating heat. A seal member is fitted to an open edge of the brake drum, and an L-shaped plate for mating with lips of the seal member is fitted to the brake ba |
| 5896776 |
Pinion gear with splined coupling directly to a drive shaft |
April 27, 1999 |
| An pinion gear includes a shaft having an input end, an output end and an intermediate portion being disposed therebetween. The input end includes a spline portion for directly securing the pinion gear to a drive shaft. The output end includes gear teeth for meshing engagement with a rin |
| 5775457 |
Final drive assembly for an all-terrain vehicle |
July 7, 1998 |
| An axle for a vehicle includes an elongated shaft having a first end, a second end and an intermediate portion being disposed therebetween. The elongated shaft includes a predetermined diameter extending over a portion thereof. The first end of the elongated shaft being designed for moun |
| 5330028 |
Saddle-riding type vehicle |
July 19, 1994 |
| A saddle-riding type vehicle including a simple, lightweight and high rigidity frame structure. The frame structure includes bending upward center pipes 22, which are joined to lower pipes 21 extending backward from the lower portions of a pair of right and left front pipes 20, respe |
| 5327989 |
Four-wheeled buggy |
July 12, 1994 |
| In a four-wheeled buggy which has a pair of front wheels and a pair of rear wheels and a seat arranged around the middle of the vehicle to enable the rider to operate the vehicle in a sitting posture thereon, a pair of right and left main frames are two-dimensionally bent upwardly at the |
| 5186423 |
Fallable type pole supporting device |
February 16, 1993 |
| The present invention discloses a fallable type pole supporting device comprising a wire extending in a longitudinal direction of a pole extended to a mounting side end of a pole member. A resilient member is disposed between an extreme end of the wire and a mounting side end of the pole |
| 5078223 |
Radiator device for a vehicle |
January 7, 1992 |
| A radiator device particularly adapted for use on off-road type vehicles includes a radiator body disposed rearwardly of the seat and spatially offset therefrom. The radiator body is enclosed about its periphery by a shroud that includes laterally extending, air-gathering wings. Fins |
| 5054842 |
Floor panel for off-road vehicle |
October 8, 1991 |
| An off-road vehicle contains a floor panel including a first inclined portion facing the seat and forming a foot rest and a second inclined portion disposed adjacent to and facing the seat and having an irregularly formed surface thereon to protect the driver against slipping upon en |
| 4924959 |
Off-road vehicle |
May 15, 1990 |
| An off-road vehicle includes an engine mounted on a rear portion of a vehicle frame and a recoil starter for starting the engine. The recoil starter has a pulley operatively coupled to the crankshaft of the engine, and a cord member wound around the pulley. The cord member has an outer |
| 4887844 |
Off-road vehicle |
December 19, 1989 |
| An off-road vehicle comprises a frame assembly constructed of a plurality of pipes including at least one lateral pipe extending horizontally and transversely of the vehicle, two front wheel suspensions having respective knuckle arms, two front wheels rotatably supported respectively on |
| 4836325 |
Off-road vehicle |
June 6, 1989 |
| An off-road vehicle has a hydraulic brake operating assembly mounted on a steering handle. The steering handle has a base, a rectangular handle portion integral with the base, and a cover covering the base. The brake operating assembly has a brake oil reservoir, two brake levers pivotall |
| 4828017 |
Cooling device for off-road vehicle |
May 9, 1989 |
| A cooling device is mounted on an off-road vehicle including a vehicle frame having a pair of main pipe members spaced from each other transversely of the vehicle and extending longitudinally of the vehicle, the main pipe members having rear portions joined to each other, a central r |
| 4817985 |
Rear suspension for off-road vehicle |
April 4, 1989 |
| An off-road vehicle has a vehicle frame of piping, a power unit including an engine, a fuel tank, an air cleaner, and other components, and a double-wishbone suspension supporting a rear wheel on the vehicle frame. The vehicle frame has a side frame member positioned laterally of the |
| 4799708 |
Off-road vehicle |
January 24, 1989 |
| An off-road vehicle comprises a vehicle frame, a pair of front wheels rotatably supported on a front portion of the vehicle frame, a pair of rear wheels rotatably supported on a rear portion of the vehicle frame, and a framework on each of lateral sides of the vehicle frame and inclu |
| 4799565 |
Fuel supply system for off-road vehicle |
January 24, 1989 |
| A fuel supply system in an off-road vehicle including front and rear wheels having wide tires, respectively, an engine mounted on a rear portion of a vehicle frame, and an exhaust pipe extending from the engine and disposed on one side of the engine transversely of the vehicle frame. The |
