| Class Number |
Class Name |
No. of Patents |
| 164/139 |
Apparatus for casting printing plates (e.g., stereotype, etc.) |
1 |
| 164/140 |
Including means for severing or trimming product while associated with mold |
1 |
| 164/141 |
Including melting chamber |
1 |
| 164/143 |
Having pressure changing means |
0 |
| 164/142 |
Having valved gate |
0 |
| 164/144 |
Including positive mold heating or cooling means |
1 |
| 164/145 |
Including stripping means |
0 |
| 164/DIG.1 |
Battery |
54 |
| 164/DIG.2 |
Bearing |
7 |
| 164/DIG.3 |
Centrifugal |
6 |
| 164/270.1 |
Combined |
28 |
| 164/417 |
Including continuous casting apparatus |
156 |
| 164/154.1 |
Control means responsive to or actuated by means sensing or measuring a condition or variable (i.e., automatic control) |
88 |
| 164/414 |
Control of coolant applied to continuously cast product |
62 |
| 164/155.1 |
Control of feed material enroute to shaping area |
44 |
| 164/155.2 |
Responsive to material level |
51 |
| 164/449.1 |
In continuous casting apparatus |
36 |
| 164/450.5 |
Including magnetic sensor |
32 |
| 164/450.4 |
Including optical sensor |
19 |
| 164/450.2 |
Including radioactive sensor |
17 |
| 164/450.1 |
Including sensor comprising electrode or float |
21 |
| 164/450.3 |
Including thermal sensor |
16 |
| 164/156.1 |
Including electrode or float sensor |
13 |
| 164/155.4 |
Responsive to position or spatial dimension |
90 |
| 164/155.5 |
Responsive to rate of change |
90 |
| 164/155.3 |
Responsive to pressure |
68 |
| 164/155.6 |
Responsive to thermal condition |
70 |
| 164/155.7 |
Responsive to weight |
21 |
| 164/413 |
Control of product withdrawal means in continuous casting apparatus |
91 |
| 164/154.2 |
Responsive to position or spatial dimension |
61 |
| 164/154.5 |
Continuous casting |
32 |
| 164/154.3 |
Responsive to rate of change |
36 |
| 164/154.4 |
Continuous casting |
36 |
| 164/154.8 |
Responsive to pressure |
55 |
| 164/154.6 |
Responsive to thermal condition |
29 |
| 164/154.7 |
Continuous casting |
32 |
| 164/397 |
Core centering or supporting means |
27 |
| 164/398 |
Chaplet |
6 |
| 164/399 |
Having anchor means |
4 |
| 164/400 |
Collapsible or knock down type core bar |
3 |
| 164/DIG.4 |
Dental |
25 |
| 164/DIG.5 |
Electron beam |
1 |
| 164/374 |
Flask or flask section |
13 |
| 164/379 |
Including means to retain or reinforce mold sand or to position reinforcement |
4 |
| 164/382 |
Depending reinforcement (e.g., gagger, etc.) |
2 |
| 164/383 |
Flask wall surface construction retains sand |
2 |
| 164/380 |
Sand strip |
1 |
| 164/381 |
Mechanically retractable |
0 |
| 164/375 |
Including roll or rock-over means |
6 |
| 164/376 |
Investment type (e.g., dental, etc.) |
23 |
| 164/384 |
Plural part flask or flask section |
4 |
| 164/392 |
Having separable sides (e.g., snap-type, etc.) |
3 |
| 164/393 |
At least one side joint hinged |
2 |
| 164/385 |
Including guide means to align superposed flask sections |
5 |
| 164/388 |
Guide means is adjustable or elastic |
4 |
| 164/390 |
By bolt movable in a slot |
0 |
| 164/389 |
Resilient or flexible guide means |
0 |
| 164/391 |
Hinged type superposed sections |
0 |
| 164/386 |
Including locking means to prevent vertical displacement |
8 |
| 164/387 |
Within and surrounded by flask wall |
5 |
| 164/377 |
Size adjustable |
5 |
| 164/378 |
Height adjustable |
1 |
| 164/146 |
Including means to directly apply magnetic force to work or to manipulate or hold shaping means |
8 |
| 164/147.1 |
By electromagnetic means |
37 |
| 164/148.1 |
For holding or assembling shaping parts |
6 |
| 164/502 |
In continuous casting apparatus |
83 |
| 164/503 |
Electromagnetic mold |
102 |
| 164/504 |
Electromagnetic stirring means |
138 |
| 164/260 |
Including vibrator means |
13 |
| 164/261 |
Fluid pressure type |
1 |
| 164/416 |
In continuous casting mold |
143 |
| 164/DIG.6 |
Ingot |
24 |
| 164/149 |
Means lubricating relatively moving and contacting apparatus parts |
30 |
| 164/259 |
Means providing inert or reducing atmosphere |
69 |
| 164/415 |
In continuous casting apparatus |
129 |
| 164/253 |
Means to apply vacuum directly to work or to hold or manipulate shaping means |
54 |
| 164/254 |
Means applying vacuum or suction directly to molten casting material |
48 |
| 164/256 |
Enclosed system including a receptacle and mold |
53 |
| 164/258 |
Including melting chamber receptacle |
39 |
| 164/257 |
Vacuum or suction means for feeding molten metal into charging chamber receptacle |
8 |
| 164/255 |
Through porous mold body |
84 |
| 164/250.1 |
Means to directly apply electrical or wave energy to work |
25 |
| 164/514 |
Arc electrode |
37 |
| 164/515 |
Electroslag remelting type apparatus |
47 |
| 164/510 |
Electrical discharge knockout means |
4 |
| 164/512 |
Electron beam melting means |
10 |
| 164/511 |
High frequency vibration means |
1 |
| 164/505 |
In continuous casting apparatus |
4 |
| 164/508 |
Arc electrode melting means |
19 |
| 164/509 |
Electroslag remelting type apparatus |
20 |
| 164/506 |
Electron beam melting means |
11 |
| 164/507 |
Induction heating means |
23 |
| 164/513 |
Induction coil means |
48 |
| 164/409 |
Means to invert a pattern plate or a mold (e.g., turn-over device, etc.) |
12 |
| 164/159 |
Means to shape a forming surface |
27 |
| 164/167 |
And separate metal casting means |
17 |
| 164/168 |
Including means for assembling shaped mold parts |
17 |
| 164/160.1 |
Including means applying vacuum directly to mold material |
44 |
| 164/160.2 |
And means to apply consumable shielding film to shaping surface |
13 |
| 164/169 |
Including means for compacting particulate fluent mold materials |
53 |
| 164/200 |
Blow type compactor |
89 |
| 164/202 |
Including foraminous blow discharge means |
13 |
| 164/201 |
Including means for relatively moving blow means into engagement with shaping member |
59 |
| 164/175 |
By centrifugal means |
0 |
| 164/174 |
By die expressing |
1 |
| 164/203 |
By vibrating means (e.g., jarring, jolting, etc.) |
24 |
| 164/206 |
By fluid actuated vibrator means |
2 |
| 164/204 |
Including cooperating static rammer means |
0 |
| 164/205 |
Roll or rock-over type machine |
1 |
| 164/195 |
Diverse means for applying pressure forces |
47 |
| 164/196 |
Vibrating and squeeze type |
2 |
| 164/197 |
Integral vibrator and squeeze head |
4 |
| 164/170 |
Flexible or deformable pressure means |
5 |
| 164/171 |
Utilizing contiguous or independent diaphragms |
7 |
| 164/180 |
Having means for withdrawing forming surface from shaping means |
15 |
| 164/186 |
Core making machine |
43 |
| 164/191 |
Drop pattern plate or support |
1 |
| 164/183 |
Having means for inverting pattern, flask, or shaping member |
28 |
| 164/184 |
Means rotating press head and mold support |
1 |
| 164/185 |
Rock-over type machine |
2 |
| 164/182 |
Means withdrawing pattern plate intermediate cope and drag member |
20 |
| 164/187 |
Pattern member acting as compressing member |
38 |
| 164/188 |
Including stripping plate |
5 |
| 164/190 |
Stripping plate |
1 |
| 164/189 |
Utilizing vibrating means |
3 |
| 164/181 |
Withdrawing station downstream of compacting station |
24 |
| 164/192 |
Including means for feeding material by gravity |
16 |
| 164/194 |
Distinct feeding and compacting stations |
16 |
| 164/193 |
Means for delivering measured charge |
11 |
| 164/176 |
Pipe mold type forming means |
2 |
| 164/177 |
By moving pattern to effect shaping |
1 |
| 164/178 |
Rotating |
2 |
| 164/179 |
Bead forming type |
0 |
| 164/172 |
Plural rammers |
15 |
| 164/173 |
Fluid pressure actuated means |
11 |
| 164/207 |
Press type compactor |
43 |
| 164/212 |
Fluid pressure means reciprocating or oscillating mold shaping member |
5 |
| 164/209 |
Having invertible table |
0 |
| 164/211 |
Including a swinging press head |
6 |
| 164/210 |
Plunger coacting with successively presented molds |
6 |
| 164/208 |
Roller compacting means |
1 |
| 164/198 |
Sand slinger type compactor |
3 |
| 164/199 |
With boom-mounted slinging means |
0 |
| 164/213 |
Including means for separating forming surface from shaping means |
24 |
| 164/225 |
By drop pattern plate or support |
1 |
| 164/226 |
By pin lifting arrangement for contacting mold |
6 |
| 164/223 |
By vibrating means |
4 |
| 164/224 |
Having means to invert flask or pattern |
13 |
| 164/222 |
Including pattern having relatively moving parts |
2 |
| 164/214 |
Means effecting parallel draw of cope and pattern plate respectively from each other and the drag |
4 |
| 164/227 |
Means for displacing mold part from stationary shaping member |
7 |
| 164/215 |
Means rotatably withdrawing pattern |
0 |
| 164/216 |
Screw thread pattern |
0 |
| 164/217 |
Utilizing a stripping plate |
0 |
| 164/218 |
Pattern withdrawn vertically downwardly |
1 |
| 164/221 |
By lever and link |
0 |
| 164/220 |
Including a mold material supporting stool |
0 |
| 164/219 |
Means effecting parallel motion |
0 |
| 164/161 |
Including means for sweeping or cutting forming surface |
7 |
| 164/163 |
Including rotating core bar |
0 |
| 164/162 |
Means for shaping sprues or risers |
5 |
| 164/164 |
Rotatable pattern |
4 |
| 164/228 |
Means for shaping core (e.g., core boxes, core molds, etc.) |
56 |
| 164/232 |
Detachable or movable member for producing a recess or cavity in core member |
9 |
| 164/233 |
Hinged core box sections |
2 |
| 164/229 |
Including character forming member (indicia) |
7 |
| 164/230 |
Including means positioning preform part for forming composite core member |
6 |
| 164/231 |
Preform part to be incorporated in cast product |
2 |
| 164/234 |
Including vent or vent forming means |
17 |
| 164/235 |
Pattern |
53 |
| 164/249 |
Composite or plural part |
43 |
| 164/237 |
Including flask member |
20 |
| 164/238 |
Pattern or pattern holding member supported by aperture in flask or flask member |
3 |
| 164/239 |
Pattern plate |
16 |
| 164/240 |
Rotatable or pivotal pattern plate |
0 |
| 164/236 |
Insert or chill supporting |
5 |
| 164/241 |
Pattern plate |
15 |
| 164/242 |
Gated pattern |
2 |
| 164/243 |
Pattern mounted on both sides of plate |
9 |
| 164/244 |
Sprue, gate or runner |
60 |
| 164/245 |
To produce undercut |
8 |
| 164/246 |
Destructible type pattern |
101 |
| 164/248 |
Loose piece type |
2 |
| 164/247 |
Rotatable or pivotal pattern or pattern section |
0 |
| 164/165 |
Shell type mold making machine |
25 |
| 164/166 |
Including plural distinct forming stations |
12 |
| 164/271 |
Means to shape metallic material |
37 |
| 164/371 |
Chill, shaping type |
6 |
| 164/373 |
Circular |
0 |
| 164/372 |
Vented |
1 |
| 164/418 |
Continuous or semicontinuous casting |
263 |
| 164/436 |
Adjustable mold size |
106 |
| 164/427 |
Continuously advancing mold part |
24 |
| 164/429 |
Endless shaping means |
202 |
| 164/430 |
Articulated segments (e.g., caterpillar type, etc.) |
51 |
| 164/431 |
With plural belts of flexible material |
69 |
| 164/433 |
Casting wheel and flexible band |
52 |
| 164/434 |
With dispensing feature |
15 |
| 164/432 |
Plural belts of flexible material |
92 |
| 164/428 |
Roll couple mold |
317 |
| 164/423 |
Filament or wire casting |
216 |
| 164/443 |
Having casting material cooling means |
230 |
| 164/444 |
Direct cooling of material |
175 |
| 164/435 |
Having deformable mold wall or thermal expansion compensating means |
36 |
| 164/421 |
Hollow casting |
47 |
| 164/422 |
Rotary mold |
8 |
| 164/419 |
Including means to convey preformed product part to mold |
33 |
| 164/437 |
Including means to dispense or distribute metal charge |
308 |
| 164/439 |
Mold contiguous with or within dispenser |
46 |
| 164/440 |
Dispensing into horizontal mold |
126 |
| 164/438 |
Movable dispenser |
53 |
| 164/441 |
Including product supporting or withdrawal means |
50 |
| 164/442 |
Roller |
170 |
| 164/424 |
Including shape-perfecting means |
14 |
| 164/425 |
Including starter bar |
26 |
| 164/426 |
Disconnectable |
51 |
| 164/420 |
Plural distinct shaping outlets |
62 |
| 164/335 |
Including ladle or crucible type melt receptacle |
113 |
| 164/337 |
Having flow control or conduit means intermediate the receptacle and mold |
249 |
| 164/336 |
Rotatable with mold or dipper type dispenser |
28 |
| 164/348 |
Including means to apply coolant to mold or casting |
139 |
| 164/339 |
Including means to assemble mold parts |
90 |
| 164/340 |
Core positioning means |
130 |
| 164/341 |
Having auxiliary means for locking assembled parts in place |
108 |
| 164/342 |
Permanent mold parts |
161 |
| 164/343 |
Fluid pressure means actuator |
46 |
| 164/344 |
Including means to eject or separate product from shaping surface |
52 |
| 164/345 |
Means to remove core |
33 |
| 164/346 |
Sectional or plural part core |
11 |
| 164/347 |
Utilizing ejector pin means |
36 |
| 164/338.1 |
Including means to heat mold |
110 |
| 164/338.2 |
In situ chemical reactive heating means |
0 |
| 164/332 |
Including means to hold or position preformed product part in shaping area |
79 |
| 164/333 |
Means for positioning plural preforms |
46 |
| 164/334 |
Means other than mold surface supports preform |
44 |
| 164/272 |
Metal revolving or tumbling type shaping means |
2 |
| 164/322 |
Plural independent molds |
28 |
| 164/323 |
Including mold translocating means |
96 |
| 164/324 |
Endless serial mold circuit |
47 |
| 164/329 |
Chain conveyor |
13 |
| 164/331 |
Including mechanical ejector for product |
7 |
| 164/330 |
Molds having separable parts |
9 |
| 164/325 |
Rotating table or wheel type translocating means |
15 |
| 164/326 |
Having a vertical axis of rotation |
32 |
| 164/327 |
Mold have separable part |
9 |
| 164/328 |
Including cam means to control assembly or disassembly of parts |
1 |
| 164/284 |
Pressure shaping means |
25 |
| 164/286 |
Centrifugal casting means |
37 |
| 164/287 |
Having balancing means |
17 |
| 164/297 |
Having coolant applying means |
12 |
| 164/291 |
Having mold expansion or warpage compensator |
3 |
| 164/292 |
Having mold or mold part clamping means |
23 |
| 164/293 |
Centrifugally actuatable |
5 |
| 164/289 |
Having mold radially disposed from axis of rotation |
31 |
| 164/290 |
Plural mold cavities |
14 |
| 164/296 |
Having plural mold cavities |
2 |
| 164/298 |
Horizontal or near horizontal axis of mold rotation |
27 |
| 164/299 |
Including axial feeding trough |
5 |
| 164/301 |
Movable along axis during feeding |
10 |
| 164/300 |
Rotatable around axis |
2 |
| 164/294 |
Including brake means |
0 |
| 164/288 |
Including means to hold or position preformed product part |
7 |
| 164/295 |
Including means to remove product from mold |
11 |
| 164/285 |
Including a pressure gas or pressure vapor generator |
6 |
| 164/302 |
Including core means |
17 |
| 164/319 |
Inelastic compression means for confined metal |
45 |
| 164/320 |
Core or internal compression member |
21 |
| 164/321 |
Fluid pressure actuated |
15 |
| 164/303 |
Injection type |
47 |
| 164/306 |
Direct pneumatic charging means |
115 |
| 164/308 |
Flask sealing cap contains a pressure conduit |
1 |
| 164/309 |
Hot chamber type |
28 |
| 164/310 |
Including means to segregate a charge |
2 |
| 164/311 |
Front loading nozzle |
2 |
| 164/307 |
Manually operated pressure generator |
0 |
| 164/305 |
Including means to vent die cavity or gate |
83 |
| 164/304 |
Including valved mold gate |
3 |
| 164/312 |
Piston-cylinder charger |
433 |
| 164/316 |
Hot chamber type |
66 |
| 164/318 |
Fluid actuated piston |
21 |
| 164/317 |
Piston contains injection conduit |
5 |
| 164/314 |
Hydraulic piston pressure means |
42 |
| 164/315 |
Having multi-way valve control unit |
11 |
| 164/313 |
Opposed piston injector |
13 |
| 164/349 |
United particle type shaping surface (e.g., sand, etc.) |
50 |
| 164/363 |
Bottom gate or side pouring mold |
39 |
| 164/364 |
Comprised of separable parts |
28 |
| 164/365 |
Including a core |
22 |
| 164/366 |
Having embedded sand reinforcing, aligning, or supporting component |
5 |
| 164/367 |
Hollow component |
6 |
| 164/368 |
Plural cores or core having plural parts |
19 |
| 164/369 |
Core |
191 |
| 164/370 |
Having integral alignment means |
20 |
| 164/362 |
Having means to restrict turbulence of flow during casting |
24 |
| 164/358 |
Including apertured strainer means for separating unwanted component from casting material |
46 |
| 164/359 |
Including means to compensate for shrinkage (e.g., shrink head, etc.) |
58 |
| 164/360 |
Blind riser |
29 |
| 164/352 |
Including metal chill |
12 |
| 164/353 |
As part of shaping surface |
14 |
| 164/354 |
Chill is a core or core part |
4 |
| 164/356 |
Hollow annular center section chill (i.e., ring) |
2 |
| 164/355 |
Plural spaced chill sections |
10 |
| 164/357 |
Consumable chill |
1 |
| 164/350 |
Mold having individual mold cavities for forming plural products |
18 |
| 164/351 |
Including core in at least one cavity |
6 |
| 164/361 |
Shell type mold |
158 |
| 164/DIG.7 |
Melt |
1 |
| 164/412 |
Miscellaneous, apparatus |
96 |
| 164/394 |
Mold jacket or slip box |
10 |
| 164/395 |
Having size adjustment feature |
0 |
| 164/396 |
Self adjusting type |
0 |
| 164/DIG.9 |
Piston-vacuum |
0 |
| 164/DIG.8 |
Piston |
6 |
| 164/DIG.15 |
Precision casting |
5 |
| 164/1 |
Process |
6 |
| 164/46 |
Disposition of a gaseous or projected particulate molten material on a shaping surface |
260 |
| 164/5 |
Including recycling of process material |
171 |
| 164/2 |
Printing plate (e.g., stereotype, etc.) forming |
3 |
| 164/3 |
Utilizing pressure application |
0 |
| 164/6 |
Shaping a forming surface (e.g., mold making, etc.) |
58 |
| 164/9 |
Final product part or material, utilized in forming or included in shaping member |
43 |
| 164/10 |
Utilizing plural preform bodies |
14 |
| 164/11 |
Preform body embedded in or held by core member |
18 |
| 164/45 |
Pattern making |
256 |
| 164/12 |
Setting or hardening shaping surface by igniting mold surface or by utilizing a forced gaseous medium |
45 |
| 164/15 |
Shaping fluent material to form mold |
68 |
| 164/37 |
By compacting material against shaping surface |
85 |
| 164/38 |
Diverse pressure applications |
28 |
| 164/40 |
Utilizing pattern as compacting member |
23 |
| 164/39 |
Vibrating or jolting during shaping |
20 |
| 164/19 |
By spraying or slinging material against shaping surface |
26 |
| 164/20 |
Particulate solid material |
23 |
| 164/22 |
Employing compressed air as ram or piston to force sand against shaping surface |
10 |
| 164/21 |
Resin containing |
53 |
| 164/16 |
Chemically reactive gas hardening of forming material |
129 |
| 164/23 |
Composite, plural part or multilayered mold |
30 |
| 164/33 |
Lining mold surface |
48 |
| 164/30 |
Positioning or maintaining position of core relative to the mold |
28 |
| 164/31 |
Utilizing plural cores |
5 |
| 164/32 |
Maintaining cores in spaced relationship within single cavity |
14 |
| 164/24 |
Sequentially forming mold portions on same shaping member |
29 |
| 164/516 |
Utilizing aqueous slurry material |
187 |
| 164/518 |
With particular binder |
41 |
| 164/517 |
With particular material for treating or perfecting casting |
33 |
| 164/519 |
With particular refractory material |
94 |
| 164/27 |
Shaping plural separable mold parts |
12 |
| 164/29 |
Cope and drag sections |
28 |
| 164/28 |
Including shaping core member |
47 |
| 164/18 |
Forming discrete molds sequentially |
24 |
| 164/44 |
Including pattern withdrawal |
27 |
| 164/17 |
Shaping forming surface by mechanically removing material therefrom or subdividing forming surface to provide plural parts |
20 |
| 164/520 |
Utilizing particular mold materials |
41 |
| 164/525 |
Particular binder material |
41 |
| 164/528 |
Inorganic material |
55 |
| 164/526 |
Resin containing |
89 |
| 164/527 |
And inorganic material |
68 |
| 164/529 |
Particular refractory material |
109 |
| 164/521 |
Self-hardenable molding material |
23 |
| 164/523 |
To perfect casting surface |
15 |
| 164/524 |
To prevent casting oxidation |
4 |
| 164/522 |
Water soluble mold material |
39 |
| 164/34 |
With destruction of pattern to disassociate |
306 |
| 164/35 |
Extracting pattern in liquid state |
232 |
| 164/36 |
Utilizing fluent extracting medium |
27 |
| 164/13 |
Shaping plate type pattern |
1 |
| 164/8 |
Utilizing a frozen mercury pattern |
0 |
| 164/7.1 |
Utilizing a vacuum during shaping |
58 |
| 164/7.2 |
To apply consumable shielding film to shaping surface |
26 |
| 164/14 |
With subsequent coating of casting surface with cast product treating or release material |
24 |
| 164/47 |
Shaping liquid metal against a forming surface |
65 |
| 164/66.1 |
Applying an inert or reducing gaseous atmosphere to work |
122 |
| 164/67.1 |
Atmosphere effected by chemical reaction |
20 |
| 164/68.1 |
While melting casting material |
22 |
| 164/137 |
Assembling of mold parts |
295 |
| 164/80 |
Casting metal introduced into mold as a solid |
82 |
| 164/72 |
Coating mold surface with a treating agent |
141 |
| 164/74 |
Gas producing coating |
9 |
| 164/76.1 |
Combined |
102 |
| 164/91 |
Composite article forming |
44 |
| 164/93 |
Co-molding diverse metals utilizing removable or fusible partition |
1 |
| 164/97 |
Incorporating particulate material |
403 |
| 164/92.1 |
Repairing or restoring article for use |
36 |
| 164/94 |
Sequential casting to form single product |
31 |
| 164/95 |
Different metals |
33 |
| 164/96 |
Metals simultaneously molten |
9 |
| 164/98 |
Shaping metal and uniting to a preform |
482 |
| 164/106 |
Cast metal reshapes preform |
10 |
| 164/99 |
Co-molding diverse metals |
17 |
| 164/100 |
Including preconditioning preform |
111 |
| 164/101 |
Chemical treatment |
49 |
| 164/102 |
By fluxing |
32 |
| 164/103 |
Preheating |
63 |
| 164/105 |
Of preform in mold |
38 |
| 164/104 |
Utilizing a liquid heat transfer agent |
6 |
| 164/112 |
Positioning or maintaining position of preform relative to mold surface |
166 |
| 164/111 |
Preform particularly provided with means to provide interlock with cast metal |
75 |
| 164/107 |
Preform utilized to affect cast metal (e.g., to chill, to cap, etc.) |
7 |
| 164/108 |
Uniting plural preforms or spaced preform portions |
106 |
| 164/110 |
Discrete contacting preforms |
23 |
| 164/109 |
Stacked planar lamina preforms |
35 |
| 164/459 |
Continuous or semicontinuous casting |
167 |
| 164/491 |
Adjusting mold size |
70 |
| 164/461 |
Forming a composite article |
115 |
| 164/464 |
Forming a hollow article |
25 |
| 164/465 |
Using a core or mandrel |
42 |
| 164/462 |
Forming filament, wire, or ribbon |
51 |
| 164/463 |
Utilizing continuously advancing surface |
305 |
| 164/479 |
Having continuously advancing shaping surface |
213 |
| 164/481 |
Utilizing endless plural belts |
119 |
| 164/480 |
Utilizing roll couple mold |
296 |
| 164/482 |
Utilizing wheel-band mold |
47 |
| 164/478 |
Having mold or product vibration or reciprocation |
121 |
| 164/472 |
Including lubricating of mold surface |
114 |
| 164/460 |
Including product cutting or breaking |
49 |
| 164/473 |
Incorporating additional material or chemically reactive agent |
105 |
| 164/485 |
Specific mold or product cooling |
143 |
| 164/486 |
Directly applying liquid coolant to product |
91 |
| 164/487 |
Direct chill casting |
99 |
| 164/488 |
Specific molten metal dispensing |
131 |
| 164/489 |
Including flow stream deflection or other than vertical dispensing |
45 |
| 164/490 |
Dispensing into horizontal mold |
84 |
| 164/484 |
Specific product withdrawal |
86 |
| 164/483 |
Starting up or ending casting process |
92 |
| 164/474 |
Utilizing a vacuum |
39 |
| 164/469 |
Utilizing electric arc or electron beam melting |
36 |
| 164/470 |
Electric arc melting with slag or flux |
18 |
| 164/471 |
Utilizing induction heating |
32 |
| 164/466 |
Utilizing magnetic force |
85 |
| 164/468 |
Applying electromagnetic stirring force to molten metal within mold or product |
132 |
| 164/467 |
Molten metal shaped by electromagnetic field |
108 |
| 164/477 |
With diverse treatment |
147 |
| 164/475 |
With inert or reducing gaseous atmosphere |
136 |
| 164/476 |
With metal working |
251 |
| 164/122 |
Controlling solidification (other than ambient cooling) |
116 |
| 164/123 |
By application of insulation to melt surface |
36 |
| 164/124 |
By direct application of flame or gas |
14 |
| 164/128 |
By utilizing a cooling liquid |
37 |
| 164/125 |
Localized or zone heat dissipation |
50 |
| 164/127 |
By utilizing a chill member |
55 |
| 164/126 |
By utilizing a cooling liquid |
35 |
| 164/122.1 |
Unidirectional solidification |
213 |
| 164/122.2 |
Single crystal formation |
123 |
| 164/48 |
Direct application of electrical or wave energy to work |
21 |
| 164/492 |
To electrically heat work material |
15 |
| 164/495 |
By arc discharge |
48 |
| 164/496 |
Composite article forming |
12 |
| 164/497 |
With application of slag or flux |
39 |
| 164/493 |
By electrical induction |
43 |
| 164/494 |
By electron beam |
21 |
| 164/498 |
Utilizing magnetic energy |
18 |
| 164/499 |
For stirring molten metal |
21 |
| 164/500 |
In transporting molten metal |
15 |
| 164/501 |
Utilizing sonic or supersonic wave energy |
15 |
| 164/79 |
Employing a pore producing agent |
38 |
| 164/129 |
Forming plural articles |
31 |
| 164/130 |
Sequentially |
81 |
| 164/90 |
Forming product having interconnected movable parts |
4 |
| 164/53 |
In situ reactive heating |
19 |
| 164/54 |
Composite article forming |
47 |
| 164/55.1 |
Incorporating addition or chemically reactive agent to metal casting material |
54 |
| 164/57.1 |
Adding metal-containing material |
88 |
| 164/58.1 |
To produce casting having nonhomogenous composition |
58 |
| 164/59.1 |
Utilizing preform body |
9 |
| 164/56.1 |
To scavenge |
39 |
| 164/78 |
Incorporating product dividing member |
0 |
| 164/133 |
Introduction control or manipulation of charge |
181 |
| 164/136 |
By movement of mold, charger, or part thereof |
113 |
| 164/135 |
Charge introduced as a plurality of streams |
30 |
| 164/134 |
Separation of unwanted component from melt |
87 |
| 164/121 |
Preconditioning of apparatus |
44 |
| 164/113 |
Pressure forming |
466 |
| 164/114 |
By centrifugal force |
89 |
| 164/117 |
Axially progressive casting |
9 |
| 164/115 |
Plural constant speeds |
4 |
| 164/118 |
Positive heating or cooling of mold |
15 |
| 164/116 |
Tilting of axis of rotation |
11 |
| 164/119 |
By direct fluid pressure |
127 |
| 164/120 |
Pressure applied after introduction of metal |
170 |
| 164/131 |
Removing article from forming surface |
121 |
| 164/132 |
Core removal |
214 |
| 164/77 |
Slush casting type |
2 |
| 164/81 |
Utilizing a liquid shaping surface |
5 |
| 164/61 |
Utilizing a vacuum |
99 |
| 164/62 |
Applying diverse pressure |
10 |
| 164/65 |
During introduction to metal |
58 |
| 164/63 |
To transport casting material to mold (e.g., vacuum forming, etc.) |
99 |
| 164/138 |
Utilizing particular shaping surface material |
178 |
| 164/75 |
With coating of preformed workpiece |
41 |
| 164/69.1 |
With step of subdividing or removing material from product or preform (e.g., cutting, mechanically or by heat; sandblasting; chemical milling; etc.) |
35 |
| 164/70.1 |
With product trimming, cutting, or breaking prior to removal from mold |
27 |
| 164/71.1 |
With vibratory treatment of casting material |
55 |
| 164/4.1 |
With measuring, testing, inspecting, or condition determination |
216 |
| 164/458 |
During cooling of mold |
19 |
| 164/457 |
During feeding of metal to mold |
182 |
| 164/456 |
During foundry sand treating or mold making |
80 |
| 164/451 |
Of continuous or semicontinuous casting |
54 |
| 164/452 |
And regulating an operation |
165 |
| 164/455 |
Cooling |
100 |
| 164/453 |
Pouring |
115 |
| 164/454 |
Product withdrawing |
127 |
| 164/447 |
Product supporting or withdrawal means for continuous casting apparatus |
23 |
| 164/448 |
Roller |
179 |
| 164/411 |
Reinforcement for mold material |
15 |
| 164/900 |
Rheo-casting |
204 |
| 164/DIG.10 |
Rotor |
8 |
| 164/DIG.11 |
Slush |
0 |
| 164/445 |
Starter bar |
19 |
| 164/446 |
Disconnectable |
43 |
| 164/401 |
Stripper or ejector |
24 |
| 164/403 |
Fluid actuated pattern stripping means |
3 |
| 164/402 |
Including means for inverting pattern |
1 |
| 164/404 |
Means to separate cast product from shaping surface |
76 |
| 164/405 |
Ingot strippers |
3 |
| 164/406 |
By stripping pin projecting through bottom of mold |
3 |
| 164/407 |
Means moving mold vertically upwardly during stripping |
3 |
| 164/408 |
Fluid pressure type stripper |
1 |
| 164/DIG.12 |
Thermit™ |
8 |
| 164/DIG.13 |
Valve |
1 |
| 164/410 |
Vent or vent forming apparatus |
64 |
| 164/DIG.14 |
Wheel |
7 |
| 164/267 |
With coating means |
57 |
| 164/268 |
Associated with a continuous or semicontinuous casting means |
64 |
| 164/157 |
With control means responsive to independent timing means |
18 |
| 164/269 |
With means for handling expelled cast product |
40 |
| 164/266 |
With metal refining means |
15 |
| 164/158 |
With positive cleaning means for apparatus |
65 |
| 164/262 |
With product severing or trimming means |
24 |
| 164/263 |
Associated with continuous casting means |
58 |
| 164/264 |
Gate member acting as severing means |
11 |
| 164/265 |
Punch out type gate severing means |
2 |
| 164/152 |
With safety control means |
12 |
| 164/153 |
Apparatus safety means |
17 |
| 164/150.1 |
With signal, indicator or inspection means |
65 |
| 164/151.2 |
Including position or spatial dimension sensor |
63 |
| 164/151.3 |
Melt level sensor |
36 |
| 164/151.1 |
Including speed sensor |
13 |
| 164/151.4 |
Including thermal sensor |
33 |
| 164/151.5 |
For detecting or predicting breakout of continuous casting strand |
15 |
| 164/151 |
Pressure indicating means |
29 |
